The Boggart Dobson Tone Ring
The Boggart Dobson spun brass tone ring produces a rich and mellow tone. It also provides added sustain with a nicely balanced warm bass and a sparkle on the high end.
Crafted in Yorkshire, England. Available in 11” or 12” diameters.
Please note
Steps to Fit a Dobson Tone Ring
Measure the Rim and Ring: Check the inner diameter of your Boggart Dobson ring against your banjo pot, as true 11-inch rims or undersized vintage shells often require minor adjustments.
Cut a Ledge (Rabbet): Use a router with a jig and a tracer/rabbet bit to shave a precise, thin shelf around the outside top edge of the wood rim. The ring should achieve a snug “slip fit” where it rests on the newly cut shelf and the outer side of the rim.
Shape and Smooth the Wood: Round over the top edge of the rim slightly if needed to match the interior contour of the tone ring, and soften any sharp edges with fine-grit sandpaper (around 180-grit).
Leave a Small Gap: Many builders recommend leaving a tiny gap (roughly 1/16th of an inch) at the bottom skirt of the tone ring; it will fully seat and tighten down under the pressure when you reinstall the banjo head.
Reassemble the Banjo: Place the Dobson ring onto the prepared ledge, put the head and tension hoop back on, and evenly tension the head. When it’s all tightened, there still should be a small gap, so that the tension/weight is bearing on the top of the pot.
£90.00
| Weight | 0.225 kg |
|---|---|
| Dimensions | 28 × 28 × 1 cm |
| Size | 11", 12" |
Product Details
Please note - Custom fees, handling and postage fees are calculated at checkout to orders for Europe and the USA. For orders sent to other non-UK destinations, it is the responsibility of the customer to pay any taxes or import duties for customs clearance.
You must be logged in to post a review.








Reviews